Form In Place   electrically conductive RFI gasket

1c-dispensing pastes

The pastes are delivered in different bulks and cartridges. After curing at room temperature, the materials stay soft and elastic with a good compression set.


The material properties for individual applications are listed in the table below.

NEUSIL™
Material description

1 - component	NEUSIL	K580	K682	3851023
RFI gasket electrically conductive		yes	yes	yes
elastomer binder		silicone	silicone	silicone
conductive particles		Ni	Ag / Cu	Ag / Cu
bead diameter	mm	0,5 - 8,0	0,5 - 8,0	0,5 - 8,0
density DIN 53479	g/cm³	2	2,4	2,6
Shore-A hardness DIN 53505	± 6	59	62	44
volume resistance VDE 0303	Ohm cm	0,9	0,08	0,08
temperature range	°C	- 55 / +200	- 55 / +125	- 55 / +125
elongation at break DIN 53504-S1	%	> 45	> 35	45
colour		black	beige	red-brown
shielding effectiveness dB:
H-field 10 KHz		70	67	67
E-field  1 MHz		110	130	130
P-field  1 GHz		88	110	110
metal with metal		good	good	good
adhesion on aluminium	N/cm	> 18	> 18	> 18
viscosity upon delivery	21 °C	viscous	viscous	viscous
tolulene solvent	%	5	5	6
catalyst		air humidity	air humidity	air humidity
curring at room temperature	21 °C	yes	yes	yes
no longer sticky after, at 0,2 mm strength	minutes	1 - 2	1 - 4	1 - 4
curring, at 0,2 mm strength	minutes	4 - 100	5 - 20	5 - 20
curing based on film strength and venting surface approxx	minutes	100 - 300	3 - 180	3 - 180
odourless curing		no	no	no
resistance against	UV, ozone	ja	ja	ja
storage time: plastic cartridges	months	0,5	0,5	0,5
storage time: aluminium cartridges	months	3	3	3
1 - component	NEUSIL	K580	K682	3851023
d o w n l o a d
technical data sheet  ➽
processing instructions  ➽
safety data sheet  ➽