Silicone Adhesives  -   electrically conductive

2-component Adhesives

The following 2-component adhesives cure at room temperature. Their viscosity can be individually selected.

The material properties for individual applications are listed in the table below.

NEUSIL™
Material description

2 - component	NEUSIL	K80	K81	K82
elastomer binder		silicone	silicone	silicone
conductive particles		nickel	Ag / glass	Ag / Cu
density DIN 53479	g/cm³	2,08	1,92	2,35
Shore-A hardness DIN 53505	± 6	63	67	61
volume resistance VDE 0303	Ohm cm	0,1	0,09	0,01
temperature range	°C	-55/+200	-55/+200	-55/+125
elongation at break DIN 53504-S1	%	> 50	> 40	> 60
colour		black	beige	beige
shielding effectiveness dB:
H-field 10 KHz		72	60	67
E-field   1 MHz		115	100	130
P-field   1 GHz		85	90	110
conductive adhesives:
metal ¹ with metal		good	good	good
metal ¹ with RFI gasket		good	good	good
RFI gasket with RFI gasket		good	good	good
non-corrosive with metal		no	no	no
viscosity upon delivery	21 °C	viscous	viscous	viscous
pot life	minutes	1 - 4	1 - 4	1 - 4
solvent: NEU-LÖS 12	alcohol based	18%	14%	15%
further thinned with NEU-LÖS 12	max. 10%	yes	yes	yes
catalyst		2-C	2-C	2-C
curing 2-component	21 °C	yes	yes	yes
film formation at 0,2 mm strength	minutes	1 - 2	1 - 2	1 - 2
curing based on film strength and venting surface approxx.	minutes	2 - 240	2 - 240	2 - 240
complete curing and high bond strength ²	hour	24	24	24
odourless curing		yes	yes	yes
resistance against	UV,ozone	yes	yes	yes
storage time	months	6	6	6
2 - component	NEUSIL	K80	K81	K82
d o w n l o a d
technical data sheet  ➽
processing instructions  ➽
safety data sheet  ➽

    ¹ after pre-treatment with NEU-PRIM 27 (primer)      ² highest bond strength and best conductivity after one day